Shear Pin “ SKU: 676 Your 3-Ton Hoist's Audible Overload Warning ” Replace It Before Every Job On the Lug-All model 6000-15, overload protection is built into the handle system itself ” and the shear pin is the most immediate, most critical element of that protection. The Shear Pin (SKU: 676) is the genuine OEM replacement safety pin that sits between the handle socket and U-frame, calibrated to break with an audible snap the moment your hoist is pushed beyond its safe operating limit. This shear pin is compatible with Lug-All model 6000-15 only, and is installed between the handle socket and U-frame where it is designed to break if the hoist becomes overloaded ” protecting the user and equipment. The EHP Group The Lug-All model 6000-15 is a heavy-duty, industrial-grade 3-ton cable come along hoist ” delivering 3,000 lbs in single line with 15 feet of cable, or 6,000 lbs in double line with 7 feet 6 inches of cable. ShoreLandr The 6000-15 features an easily replaceable shear pin that breaks with an audible noise to warn of serious overload conditions. That audible snap is the signal to immediately stop, release the load, and replace the shear pin before continuing work. After the shear pin breaks, the come-along remains operational so the load can be reduced as soon as possible ” before the hoist handle bends, further protecting the tool investment. This three-stage protection system ” shear pin snap → handle bend warning → structural protection ” is a hallmark of Lug-All's engineering philosophy, and the shear pin is the first stage. Lug-AllGME Supply The handle on the 6000-15 is designed to bend at 125 to 150 percent of rated capacity as a secondary overload warning, protecting the user and equipment from more serious damage ” but only if the shear pin has already activated. A shear pin that has been replaced with a non-OEM substitute of incorrect material or diameter may not break at the calibrated overload threshold, bypassing the first level of protection entirely and placing all overload stress on the handle and structural components. accentuate Replacement is fast and simple. The shear pin installation requires only sliding the pin into the handle socket bore until properly seated ” a field-serviceable task that can be done in seconds without tools. Keeping spare shear pins on hand ensures that a broken pin never forces extended downtime on the job site. zoro Using authentic Lug-All replacement parts means sustaining the original design integrity of your unit ” the cast-aluminum structure, robust pawl assemblies, and reliable hardware that make Lug-All hoists a trusted choice in demanding industrial, construction, and utility settings. Lug-All

Product Specifications SpecificationDetailSKU / Part Number676Part NameShear PinCompatible ModelLug-All #6000-15 onlyHoist Type3-Ton Cable Ratchet Winch HoistHoist Capacity (Single Line)3,000 lbsHoist Capacity (Double Line)6,000 lbsLocationBetween Handle Socket and U-FrameActivationAudible break at overload thresholdComponent CategoryHandle Assembly / Overload ProtectionCountry of OriginUSA

Critical Safety Notice Never substitute a non-OEM pin, bolt, or hardware for the genuine Lug-All shear pin. A substitute shear pin of incorrect material or strength can allow the hoist to be loaded far beyond rated capacity before any warning occurs ” eliminating the safety valve action of the overload system entirely. Always replace with SKU 676 ” the only pin calibrated to the exact overload threshold of the 6000-15. zoro Order SKU 676 today and keep your Lug-All 6000-15 overload protection system fully armed at 3-ton capacity.