The XA_TA65XF Expansion Kit addresses the need for controlled expansion gaps in Saf_T_Bar T_Series conductor systems. Engineered to accommodate gap expansions up to 1_ per phase (or 0.5_ typical), the kit includes a jumper cable and guide bracket to align the separated rails and maintain electrical continuity. It ensures reliable collector tracking and consistent conductivity across thermal or installation-induced gaps. Recommended installation intervals are approximately every 150_ft for steel conductors and 100_ft for copper, depending on ambient temperature variations. Key Features 65_A system compatibility — suits standard T_Series conductor bars. Gap management — supports up to 1_ expansion per phase (0_°F to 100_°F). Included jumper and guide bracket — maintains electrical continuity and rail alignment. Snap-in or bolt-mount installation — enables easy field placements where needed. Temperature-aware deployment — spacing recommendations based on rail material and thermal behavior. Technical Specifications Specification Details Part Number XA_TA65XF Series Saf_T_Bar T_Series Current Rating 65_A continuous Maximum Expansion Up to 1_ per phase (0_°F) to 0_ at higher temps Rail Support Interval ~150_ft (steel) / ~100_ft (copper) Kit Components Jumper cable, guide bracket, hardware Collector Recommendation Use tandem collectors for optimal continuity Typical Applications Crane runways, conveyors, monorails requiring gap control