Built as a 2 by 10 foot triangle to choker assembly, the Machining & Welding Tri-Cho Wire Mesh Sling 2X10 FT carries a 2,300 pound working load limit.

This sling can be rigged as a straight vertical lift or as a choker hitch, giving you two ways to secure a load with the same piece of equipment.

The sling body is woven from galvanized steel wire mesh, with triangle or choker end fittings sized to match the rated capacity of the assembly.

Wire mesh handles heat and rough surfaces that would cut or melt a synthetic sling, which matters in foundry, forging, and scrap handling work.

Equipment like this shows up across a wide range of industries, from steel fabrication and machine shops to warehousing, construction, and vehicle service centers. Anywhere crews need to move a load overhead in a controlled, repeatable way, a purpose-built lift beam or crane keeps the job safer and faster than improvised rigging. Once a facility standardizes on the right lifting equipment for its typical loads, operators spend less time rigging and more time actually getting work done.

Before putting any lifting equipment into service, verify it matches your hoist or crane setup and confirm the rated capacity covers your heaviest expected load with margin to spare. Routine inspection of welds, pins, and connection hardware helps catch wear before it becomes a safety issue. Keep a simple inspection log if your facility does not already have one, since tracking wear over time makes it easier to plan replacement before a part actually fails in use.

Properly rated hardware, stored and maintained correctly, tends to outlast the equipment it gets paired with. Building a simple habit of checking condition before each use costs very little time and pays off in fewer surprises when a piece of rigging hardware is actually under load.

See the specifications below for the exact numbers you will want to check before ordering.

Order the Machining & Welding Tri-Cho Wire Mesh Sling 2X10 FT for a 2,300 pound capacity mesh sling sized 2 by 10 feet.

Product Info:
•  Working Load Limit: 2,300 lbs
•  Configuration: Triangle to Choker
•  Width: 2 ft
•  Length: 10 ft
•  Shipping Weight: 15.1 lbs