The Machining & Welding Plate Clamp 0-1 IN Non Marring clamps onto plate stock in the 0 to 1 inch range, rated to 3,300 pounds.

The clamp jaw grips the edge of a steel plate, letting a crane or hoist lift and position it vertically without drilling holes or welding lift points.

Steel construction and a spring-loaded or cam-action jaw keep the clamp gripping securely once the load is lifted.

Plate clamps avoid the need to drill or weld temporary lift points onto stock that will be cut or machined later.

From production floors to rail yards to municipal utility crews, this style of equipment gets used wherever a load needs to move safely between two points. Standardizing on purpose-built lifting equipment also makes training new operators easier, since the rigging setup stays consistent from lift to lift instead of changing based on whatever hardware happens to be nearby.

Rated capacity should always be treated as a hard limit, not a target, and a quick visual inspection before each lift is one of the simplest ways to keep a lifting operation safe. Make sure your operators are trained on the specific rigging setup this equipment requires, and confirm that anyone signing off on a lift understands how to read the working load limit and match it against the actual load being moved.

Well-built rigging hardware holds its rated capacity through years of regular use, provided it is inspected and stored properly between jobs. A dry, organized storage area away from corrosive chemicals or extreme temperature swings goes a long way toward extending the service life of steel components.

The full spec sheet is below, covering capacity, dimensions, and construction details at a glance.

Order the Machining & Welding Plate Clamp 0-1 IN Non Marring rated to 3,300 pounds for plate from 0 to 1 inches.

Product Info:
•  Working Load Limit: 3,300 lbs
•  Jaw Opening Range: 0 in to 1 in
•  Style: Non-marring jaw
•  Shipping Weight: 15 lbs