Built to handle plate from 0 to 1 inches, the Machining & Welding Plate Clamp 0-1 IN Hinged carries a 4,400 pound working load limit.

Plate clamps like this are a standard tool in fabrication shops and steel yards for moving sheet and plate stock quickly between cutting, welding, and storage.

The clamp body is forged steel with a serrated or hardened jaw, engineered to grip within its rated thickness range without slipping.

Plate clamps avoid the need to drill or weld temporary lift points onto stock that will be cut or machined later.

Facilities ranging from small machine shops to large distribution centers keep equipment like this on hand for the lifts that come up week after week. It is the kind of tool that earns its spot on the floor by saving time on every single pick, and it pays for itself quickly once it replaces improvised rigging on a recurring job.

As with any lifting equipment, never exceed the rated working load limit, and inspect slings, hooks, shackles, and connection points before every use. Confirm compatibility with your hoist, crane, or trolley system before placing an order, and follow your facility's rigging and lockout procedures for every lift. A few minutes spent checking hardware condition and load balance up front is far cheaper than dealing with a dropped or shifted load later, and it keeps your team's daily routine consistent from one job to the next.

Equipment that sees daily use benefits from a quick visual check every time it comes out of storage, not just during scheduled inspections. Catching a small issue, like surface corrosion or a bent component, before it becomes a larger problem keeps rigging hardware safe and in service longer.

See the specifications below for the exact numbers you will want to check before ordering.

Add the Machining & Welding Plate Clamp 0-1 IN Hinged to your rigging for fast, secure plate handling.

Product Info:
•  Working Load Limit: 4,400 lbs
•  Jaw Opening Range: 0 in to 1 in
•  Style: Hinged jaw
•  Shipping Weight: 22.8 lbs