When a workstation needs repeated overhead lifts in the same spot, the Machining & Welding Cantilever Jib Crane 20 FT Span is built for the job. Its 20 foot span and 1,000 pound capacity put a hoist within reach across the full swing radius.

A single jib crane can often replace multiple hoist drops along a wall, since the rotating boom reaches any point within its swing radius from one fixed mast.

The mast and boom are fabricated from structural steel and designed to rotate smoothly on a bearing or collar assembly, holding the rated capacity through the full range of rotation.

For single-station lifting, a cantilever jib crane is typically faster to install and less expensive than extending an overhead runway system.

Equipment like this shows up across a wide range of industries, from steel fabrication and machine shops to warehousing, construction, and vehicle service centers. Anywhere crews need to move a load overhead in a controlled, repeatable way, a purpose-built lift beam or crane keeps the job safer and faster than improvised rigging. Once a facility standardizes on the right lifting equipment for its typical loads, operators spend less time rigging and more time actually getting work done.

Rated capacity should always be treated as a hard limit, not a target, and a quick visual inspection before each lift is one of the simplest ways to keep a lifting operation safe. Make sure your operators are trained on the specific rigging setup this equipment requires, and confirm that anyone signing off on a lift understands how to read the working load limit and match it against the actual load being moved.

Durability matters as much as initial capacity when choosing rigging equipment, since hardware that wears unevenly or corrodes quickly ends up costing more over its service life. Choosing components built to recognized manufacturing standards is one of the simplest ways to avoid that added cost down the road.

The full spec sheet is below, covering capacity, dimensions, and construction details at a glance.

Order the Machining & Welding Cantilever Jib Crane 20 FT Span and free up your main crane for the jobs that actually need it to travel across the shop.

Product Info:
•  Working Load Limit: 1,000 lbs
•  Boom Span: 20 ft
•  Style: Cantilever, rotating mast
•  Frame Material: Structural steel
•  Shipping Weight: 1295 lbs