When a workstation needs repeated overhead lifts in the same spot, the Machining & Welding Cantilever Jib Crane 12 FT Span is built for the job. Its 12 foot span and 1,000 pound capacity put a hoist within reach across the full swing radius.

The rotating boom covers a full circle around the mast, which is ideal for CNC machine tending, assembly cells, and any station where the same lift happens over and over.

A reinforced base plate anchors the mast, while the boom is engineered to carry the working load limit at any point along its span, not just close to the mast.

For single-station lifting, a cantilever jib crane is typically faster to install and less expensive than extending an overhead runway system.

From production floors to rail yards to municipal utility crews, this style of equipment gets used wherever a load needs to move safely between two points. Standardizing on purpose-built lifting equipment also makes training new operators easier, since the rigging setup stays consistent from lift to lift instead of changing based on whatever hardware happens to be nearby.

As with any lifting equipment, never exceed the rated working load limit, and inspect slings, hooks, shackles, and connection points before every use. Confirm compatibility with your hoist, crane, or trolley system before placing an order, and follow your facility's rigging and lockout procedures for every lift. A few minutes spent checking hardware condition and load balance up front is far cheaper than dealing with a dropped or shifted load later, and it keeps your team's daily routine consistent from one job to the next.

Properly rated hardware, stored and maintained correctly, tends to outlast the equipment it gets paired with. Building a simple habit of checking condition before each use costs very little time and pays off in fewer surprises when a piece of rigging hardware is actually under load.

Full specifications are listed below so you can confirm fit against your current rigging before it ships.

The Machining & Welding Cantilever Jib Crane 12 FT Span is built to take over the repetitive lifts your team currently handles by hand or with a shared bridge crane.

Product Info:
•  Working Load Limit: 1,000 lbs
•  Boom Span: 12 ft
•  Style: Cantilever, rotating mast
•  Frame Material: Structural steel
•  Shipping Weight: 855 lbs