The Machining & Welding Cantilever Jib Crane 12 FT Span is a cantilever style jib crane that rotates around a fixed mast, giving you a 12 foot working span and a 6,000 pound working load limit for a dedicated lifting station.

Because the boom swings freely, operators can pull a load away from a machine and set it down nearby in one continuous motion, cutting cycle time compared to a straight-line hoist.

Steel construction and a rotating collar design keep the unit rigid at rated capacity while still allowing full 360 degree or wall mounted swing depending on how you configure it.

This is the type of crane most shops add once they notice the same manual lift happening at the same workstation day after day.

Facilities ranging from small machine shops to large distribution centers keep equipment like this on hand for the lifts that come up week after week. It is the kind of tool that earns its spot on the floor by saving time on every single pick, and it pays for itself quickly once it replaces improvised rigging on a recurring job.

Before putting any lifting equipment into service, verify it matches your hoist or crane setup and confirm the rated capacity covers your heaviest expected load with margin to spare. Routine inspection of welds, pins, and connection hardware helps catch wear before it becomes a safety issue. Keep a simple inspection log if your facility does not already have one, since tracking wear over time makes it easier to plan replacement before a part actually fails in use.

Durability matters as much as initial capacity when choosing rigging equipment, since hardware that wears unevenly or corrodes quickly ends up costing more over its service life. Choosing components built to recognized manufacturing standards is one of the simplest ways to avoid that added cost down the road.

The specifications below cover everything you need to check compatibility with your equipment.

The Machining & Welding Cantilever Jib Crane 12 FT Span is built to take over the repetitive lifts your team currently handles by hand or with a shared bridge crane.

Product Info:
•  Working Load Limit: 6,000 lbs
•  Boom Span: 12 ft
•  Style: Cantilever, rotating mast
•  Frame Material: Structural steel
•  Shipping Weight: 1670 lbs