The Machining & Welding 6000 LB 66 IN Economy Lift Beam is a fixed length beam at 66 inches, carrying a 6,000 pound working load limit for general purpose lifting jobs.

This beam suits crates, panels, motors, and general shop loads where a simple two-point pick is all the job requires.

Steel construction throughout gives the beam the strength to handle its full rated capacity while keeping the design simple and easy to maintain.

Low headroom design recovers usable hook travel in shops where ceiling clearance is already limited.

Maintenance departments, fabrication shops, warehouses, and construction crews all rely on equipment in this category to handle lifts that come up again and again. Having the right beam or crane on hand means operators are not left rigging a load with mismatched slings or borrowed hardware, which keeps every lift consistent regardless of who is running it that day.

Good lifting practice starts before the load ever leaves the ground: confirm the working load limit fits the job, check that all hardware is in good condition, and keep the load centered to avoid uneven strain on the rigging. These habits matter as much as the equipment itself, and they cost nothing beyond a few extra minutes of attention before each pick, which is a fair trade for a safer shop floor.

Well-built rigging hardware holds its rated capacity through years of regular use, provided it is inspected and stored properly between jobs. A dry, organized storage area away from corrosive chemicals or extreme temperature swings goes a long way toward extending the service life of steel components.

See the specifications below for the exact numbers you will want to check before ordering.

The Machining & Welding 6000 LB 66 IN Economy Lift Beam gives your crew a dependable, low profile option for everyday two-point picks.

Product Info:
•  Working Load Limit: 6,000 lbs
•  Beam Length: 66 in
•  Headroom: 17.77 in
•  Frame Material: Structural steel
•  Shipping Weight: 122 lbs