The Machining & Welding 6000 LB 60 IN Economy Lift Beam is sized at 60 inches with a 6,000 pound rating, an economical option for routine two-point lifts.

This beam suits crates, panels, motors, and general shop loads where a simple two-point pick is all the job requires.

Painted steel construction resists everyday shop wear and keeps the beam ready for repeated use without extra upkeep.

An economy fixed length beam is a practical addition alongside adjustable beams, covering the lifts that always fall at the same length.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Good lifting practice starts before the load ever leaves the ground: confirm the working load limit fits the job, check that all hardware is in good condition, and keep the load centered to avoid uneven strain on the rigging. These habits matter as much as the equipment itself, and they cost nothing beyond a few extra minutes of attention before each pick, which is a fair trade for a safer shop floor.

Well-built rigging hardware holds its rated capacity through years of regular use, provided it is inspected and stored properly between jobs. A dry, organized storage area away from corrosive chemicals or extreme temperature swings goes a long way toward extending the service life of steel components.

The full spec sheet is below, covering capacity, dimensions, and construction details at a glance.

Order the Machining & Welding 6000 LB 60 IN Economy Lift Beam for a simple, fixed length beam that needs no setup before it goes to work.

Product Info:
•  Working Load Limit: 6,000 lbs
•  Beam Length: 60 in
•  Headroom: 17.77 in
•  Frame Material: Structural steel
•  Shipping Weight: 113 lbs