The Machining & Welding 40000 LB 4 FT Standard Lift Beam is sized at 4 feet with a 40,000 pound rating, a solid choice for standard two-point lifts.

The swivel hook connections reduce twisting in the sling legs during the lift, keeping the rigging aligned from pickup to set-down.

The swivel hooks are rated to match the beam's overall working load limit, so the whole assembly is engineered as one system.

Swivel hooks add flexibility to the rigging itself, even though the beam length stays fixed, which covers a wider range of load shapes than you might expect.

Facilities ranging from small machine shops to large distribution centers keep equipment like this on hand for the lifts that come up week after week. It is the kind of tool that earns its spot on the floor by saving time on every single pick, and it pays for itself quickly once it replaces improvised rigging on a recurring job.

Good lifting practice starts before the load ever leaves the ground: confirm the working load limit fits the job, check that all hardware is in good condition, and keep the load centered to avoid uneven strain on the rigging. These habits matter as much as the equipment itself, and they cost nothing beyond a few extra minutes of attention before each pick, which is a fair trade for a safer shop floor.

Well-built rigging hardware holds its rated capacity through years of regular use, provided it is inspected and stored properly between jobs. A dry, organized storage area away from corrosive chemicals or extreme temperature swings goes a long way toward extending the service life of steel components.

The full spec sheet is below, covering capacity, dimensions, and construction details at a glance.

With swivel hooks ready to rig, the Machining & Welding 40000 LB 4 FT Standard Lift Beam is set to go the moment the next lift comes up.

Product Info:
•  Working Load Limit: 40,000 lbs
•  Beam Length: 4 ft
•  End Fittings: Swivel hooks
•  Frame Material: Structural steel
•  Shipping Weight: 445 lbs