Built as a straightforward workhorse beam, the Machining & Welding 40000 LB 10 FT Standard Lift Beam offers 10 feet of length and a 40,000 pound working load limit.

A fixed length beam like this is easy to keep on hand for the recurring lifts that make up most of a shop's daily workload.

Steel construction throughout gives the beam the rigidity to carry its full rated capacity without excessive deflection under load.

This is the type of beam most shops keep several of on hand, since it covers the bulk of everyday two-point lifting needs.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Rated capacity should always be treated as a hard limit, not a target, and a quick visual inspection before each lift is one of the simplest ways to keep a lifting operation safe. Make sure your operators are trained on the specific rigging setup this equipment requires, and confirm that anyone signing off on a lift understands how to read the working load limit and match it against the actual load being moved.

Well-built rigging hardware holds its rated capacity through years of regular use, provided it is inspected and stored properly between jobs. A dry, organized storage area away from corrosive chemicals or extreme temperature swings goes a long way toward extending the service life of steel components.

The full spec sheet is below, covering capacity, dimensions, and construction details at a glance.

With swivel hooks ready to rig, the Machining & Welding 40000 LB 10 FT Standard Lift Beam is set to go the moment the next lift comes up.

Product Info:
•  Working Load Limit: 40,000 lbs
•  Beam Length: 10 ft
•  End Fittings: Swivel hooks
•  Frame Material: Structural steel
•  Shipping Weight: 1195 lbs