The Machining & Welding 4000 LB Coil Lifter-Upender is a upender coil lifter rated to 4,000 pounds, sized for 18.0" THROAT 23.1" HEADROOM.

This lifter grips a coil from the inside diameter or clamps around the outside, letting a crane or hoist move rolled stock without crushing or scarring it.

The lifter is fabricated from structural steel with a grip mechanism engineered to hold its rated capacity while protecting the coil's surface.

A dedicated coil lifter reduces the risk of surface damage that chains or slings wrapped directly around a coil can cause.

Maintenance departments, fabrication shops, warehouses, and construction crews all rely on equipment in this category to handle lifts that come up again and again. Having the right beam or crane on hand means operators are not left rigging a load with mismatched slings or borrowed hardware, which keeps every lift consistent regardless of who is running it that day.

Good lifting practice starts before the load ever leaves the ground: confirm the working load limit fits the job, check that all hardware is in good condition, and keep the load centered to avoid uneven strain on the rigging. These habits matter as much as the equipment itself, and they cost nothing beyond a few extra minutes of attention before each pick, which is a fair trade for a safer shop floor.

Rigging hardware like this sees repeated use, so look for equipment that is properly rated, clearly marked, and traceable to a manufacturer that stands behind its specifications. Keeping documentation on hand for each piece of equipment also makes routine inspections and any future certification requirements easier to manage.

Details on capacity, dimensions, and hardware are listed below for a quick comparison against your requirements.

The Machining & Welding 4000 LB Coil Lifter-Upender is ready to move coils safely and efficiently.

Product Info:
•  Capacity: 4,000 lbs
•  Style: Upender
•  Detail: 18.0" THROAT 23.1" HEADROOM
•  Shipping Weight: 33 lbs