The Machining & Welding 1000 LB Coil Lifter-Upender is a upender coil lifter rated to 1,000 pounds, sized for 13.0" THROAT 17.0" HEADROOM.

This lifter grips a coil from the inside diameter or clamps around the outside, letting a crane or hoist move rolled stock without crushing or scarring it.

A rugged frame and rated attachment points give this lifter the strength to handle coils repeatedly on a busy production floor.

A dedicated coil lifter reduces the risk of surface damage that chains or slings wrapped directly around a coil can cause.

From production floors to rail yards to municipal utility crews, this style of equipment gets used wherever a load needs to move safely between two points. Standardizing on purpose-built lifting equipment also makes training new operators easier, since the rigging setup stays consistent from lift to lift instead of changing based on whatever hardware happens to be nearby.

Good lifting practice starts before the load ever leaves the ground: confirm the working load limit fits the job, check that all hardware is in good condition, and keep the load centered to avoid uneven strain on the rigging. These habits matter as much as the equipment itself, and they cost nothing beyond a few extra minutes of attention before each pick, which is a fair trade for a safer shop floor.

Well-built rigging hardware holds its rated capacity through years of regular use, provided it is inspected and stored properly between jobs. A dry, organized storage area away from corrosive chemicals or extreme temperature swings goes a long way toward extending the service life of steel components.

Details on capacity, dimensions, and hardware are listed below for a quick comparison against your requirements.

The Machining & Welding 1000 LB Coil Lifter-Upender is ready to move coils safely and efficiently.

Product Info:
•  Capacity: 1,000 lbs
•  Style: Upender
•  Detail: 13.0" THROAT 17.0" HEADROOM
•  Shipping Weight: 23 lbs