The Machining & Welding 4000 LB 72 IN Economy Lift Beam is a fixed length beam at 72 inches, carrying a 4,000 pound working load limit for general purpose lifting jobs.

With only 13.5 inches of headroom, the beam keeps rigging height to a minimum, which helps when your hoist hook does not have much room to spare.

The beam is fabricated from structural steel in a compact, low profile cross-section that keeps both weight and headroom to a minimum.

Low headroom design recovers usable hook travel in shops where ceiling clearance is already limited.

Equipment like this shows up across a wide range of industries, from steel fabrication and machine shops to warehousing, construction, and vehicle service centers. Anywhere crews need to move a load overhead in a controlled, repeatable way, a purpose-built lift beam or crane keeps the job safer and faster than improvised rigging. Once a facility standardizes on the right lifting equipment for its typical loads, operators spend less time rigging and more time actually getting work done.

As with any lifting equipment, never exceed the rated working load limit, and inspect slings, hooks, shackles, and connection points before every use. Confirm compatibility with your hoist, crane, or trolley system before placing an order, and follow your facility's rigging and lockout procedures for every lift. A few minutes spent checking hardware condition and load balance up front is far cheaper than dealing with a dropped or shifted load later, and it keeps your team's daily routine consistent from one job to the next.

Well-built rigging hardware holds its rated capacity through years of regular use, provided it is inspected and stored properly between jobs. A dry, organized storage area away from corrosive chemicals or extreme temperature swings goes a long way toward extending the service life of steel components.

The specifications below cover everything you need to check compatibility with your equipment.

With nothing to adjust, the Machining & Welding 4000 LB 72 IN Economy Lift Beam is one less thing to think about before a routine lift.

Product Info:
•  Working Load Limit: 4,000 lbs
•  Beam Length: 72 in
•  Headroom: 13.5 in
•  Frame Material: Structural steel
•  Shipping Weight: 96 lbs