When you need a dependable, no-frills spreader beam, the Machining & Welding 4000 LB 48 IN Economy Lift Beam covers it at 48 inches and 4,000 pounds working load limit.

At just 12.5 inches of headroom, the beam is a practical choice anywhere hook travel is already tight.

The beam is fabricated from structural steel in a compact, low profile cross-section that keeps both weight and headroom to a minimum.

An economy fixed length beam is a practical addition alongside adjustable beams, covering the lifts that always fall at the same length.

From production floors to rail yards to municipal utility crews, this style of equipment gets used wherever a load needs to move safely between two points. Standardizing on purpose-built lifting equipment also makes training new operators easier, since the rigging setup stays consistent from lift to lift instead of changing based on whatever hardware happens to be nearby.

Good lifting practice starts before the load ever leaves the ground: confirm the working load limit fits the job, check that all hardware is in good condition, and keep the load centered to avoid uneven strain on the rigging. These habits matter as much as the equipment itself, and they cost nothing beyond a few extra minutes of attention before each pick, which is a fair trade for a safer shop floor.

Equipment that sees daily use benefits from a quick visual check every time it comes out of storage, not just during scheduled inspections. Catching a small issue, like surface corrosion or a bent component, before it becomes a larger problem keeps rigging hardware safe and in service longer.

The specifications below cover everything you need to check compatibility with your equipment.

Add the Machining & Welding 4000 LB 48 IN Economy Lift Beam to your rack for the low headroom picks that come up more often than you would expect.

Product Info:
•  Working Load Limit: 4,000 lbs
•  Beam Length: 48 in
•  Headroom: 12.5 in
•  Frame Material: Structural steel
•  Shipping Weight: 61 lbs