The Machining & Welding 4000 LB 6 FT Economy H-Beam is a wide-frame lift beam built for loads that need support across two dimensions. Sized 4 feet wide by 6 feet long, it carries a 4,000 pound working load limit.

Because the frame spans both dimensions of the load, it distributes weight more evenly across the rigging than a single straight lift beam would.

Steel construction throughout gives the frame the stiffness needed to keep a wide load level, even when weight is not perfectly centered.

For loads that will not balance safely on a two-point beam, an H-frame lift beam is often the safer and more stable choice.

Equipment like this shows up across a wide range of industries, from steel fabrication and machine shops to warehousing, construction, and vehicle service centers. Anywhere crews need to move a load overhead in a controlled, repeatable way, a purpose-built lift beam or crane keeps the job safer and faster than improvised rigging. Once a facility standardizes on the right lifting equipment for its typical loads, operators spend less time rigging and more time actually getting work done.

Rated capacity should always be treated as a hard limit, not a target, and a quick visual inspection before each lift is one of the simplest ways to keep a lifting operation safe. Make sure your operators are trained on the specific rigging setup this equipment requires, and confirm that anyone signing off on a lift understands how to read the working load limit and match it against the actual load being moved.

Rigging hardware like this sees repeated use, so look for equipment that is properly rated, clearly marked, and traceable to a manufacturer that stands behind its specifications. Keeping documentation on hand for each piece of equipment also makes routine inspections and any future certification requirements easier to manage.

See the specifications below for the exact numbers you will want to check before ordering.

With lift points on two axes, the Machining & Welding 4000 LB 6 FT Economy H-Beam takes the guesswork out of rigging oddly shaped loads.

Product Info:
•  Working Load Limit: 4,000 lbs
•  Frame Width: 4 ft
•  Frame Length: 6 ft
•  Style: H-frame, four-point lifting
•  Frame Material: Structural steel
•  Shipping Weight: 245 lbs