The Machining & Welding 4000 LB 6 FT Economy H-Beam gives you a 6 foot by 6 foot lifting frame rated to 4,000 pounds, built for loads a single straight beam cannot stabilize on its own.

The frame shape lets you attach slings at four corners instead of two, which reduces load sway and keeps the pick more controlled during travel.

The frame is fabricated from structural steel in an H configuration, welded for rigidity so the full working load limit is supported at all four lift points.

An H-beam is a straightforward way to add lift points without engineering a custom spreader for every oversized load that comes through the shop.

From production floors to rail yards to municipal utility crews, this style of equipment gets used wherever a load needs to move safely between two points. Standardizing on purpose-built lifting equipment also makes training new operators easier, since the rigging setup stays consistent from lift to lift instead of changing based on whatever hardware happens to be nearby.

Before putting any lifting equipment into service, verify it matches your hoist or crane setup and confirm the rated capacity covers your heaviest expected load with margin to spare. Routine inspection of welds, pins, and connection hardware helps catch wear before it becomes a safety issue. Keep a simple inspection log if your facility does not already have one, since tracking wear over time makes it easier to plan replacement before a part actually fails in use.

Durability matters as much as initial capacity when choosing rigging equipment, since hardware that wears unevenly or corrodes quickly ends up costing more over its service life. Choosing components built to recognized manufacturing standards is one of the simplest ways to avoid that added cost down the road.

Full specifications are listed below so you can confirm fit against your current rigging before it ships.

With lift points on two axes, the Machining & Welding 4000 LB 6 FT Economy H-Beam takes the guesswork out of rigging oddly shaped loads.

Product Info:
•  Working Load Limit: 4,000 lbs
•  Frame Width: 6 ft
•  Frame Length: 6 ft
•  Style: H-frame, four-point lifting
•  Frame Material: Structural steel
•  Shipping Weight: 285 lbs