The Machining & Welding 4000 LB 36 IN Roll Lifting Beam is designed to lift rolls, coils, and cylindrical loads from the inside diameter. It measures 36 inches and is rated to 4,000 pounds working load limit.

This beam is a common fit for paper mills, print shops, and any operation handling coiled material where protecting the outer wrap from crushing or scuffing matters.

The beam is fabricated from structural steel, sized and shaped to fit inside standard roll cores while still carrying the full rated working load limit.

Lifting from the core instead of wrapping the outside protects the roll's surface, which matters for paper, film, and other materials that scuff or crush easily.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

As with any lifting equipment, never exceed the rated working load limit, and inspect slings, hooks, shackles, and connection points before every use. Confirm compatibility with your hoist, crane, or trolley system before placing an order, and follow your facility's rigging and lockout procedures for every lift. A few minutes spent checking hardware condition and load balance up front is far cheaper than dealing with a dropped or shifted load later, and it keeps your team's daily routine consistent from one job to the next.

Durability matters as much as initial capacity when choosing rigging equipment, since hardware that wears unevenly or corrodes quickly ends up costing more over its service life. Choosing components built to recognized manufacturing standards is one of the simplest ways to avoid that added cost down the road.

The full spec sheet is below, covering capacity, dimensions, and construction details at a glance.

With a bearing surface sized to the core, the Machining & Welding 4000 LB 36 IN Roll Lifting Beam seats securely before every lift.

Product Info:
•  Working Load Limit: 4,000 lbs
•  Beam Length: 36 in
•  Inside Length: 74 in
•  Style: Inside diameter roll lifting
•  Shipping Weight: 154 lbs