For paper rolls, coil stock, and similar cylindrical loads, the Machining & Welding 2000 LB 36 IN Roll Lifting Beam provides a 36 inch beam rated to 2,000 pounds, built to lift from the core rather than the outside surface.

The 50 inch inside dimension gives the beam a stable bearing surface inside the roll, which keeps the load centered and level during the lift.

A durable finish protects the beam from the wear of repeated insertion and removal from roll cores on a busy production floor.

This is a purpose-built tool for an industry-specific problem, and it typically pays for itself quickly in reduced product damage and faster changeovers.

Equipment like this shows up across a wide range of industries, from steel fabrication and machine shops to warehousing, construction, and vehicle service centers. Anywhere crews need to move a load overhead in a controlled, repeatable way, a purpose-built lift beam or crane keeps the job safer and faster than improvised rigging. Once a facility standardizes on the right lifting equipment for its typical loads, operators spend less time rigging and more time actually getting work done.

As with any lifting equipment, never exceed the rated working load limit, and inspect slings, hooks, shackles, and connection points before every use. Confirm compatibility with your hoist, crane, or trolley system before placing an order, and follow your facility's rigging and lockout procedures for every lift. A few minutes spent checking hardware condition and load balance up front is far cheaper than dealing with a dropped or shifted load later, and it keeps your team's daily routine consistent from one job to the next.

Properly rated hardware, stored and maintained correctly, tends to outlast the equipment it gets paired with. Building a simple habit of checking condition before each use costs very little time and pays off in fewer surprises when a piece of rigging hardware is actually under load.

Full specifications are listed below so you can confirm fit against your current rigging before it ships.

Order the Machining & Welding 2000 LB 36 IN Roll Lifting Beam for a beam built around the shape of the load it is meant to carry.

Product Info:
•  Working Load Limit: 2,000 lbs
•  Beam Length: 36 in
•  Inside Length: 50 in
•  Style: Inside diameter roll lifting
•  Shipping Weight: 75 lbs