The Machining & Welding 4000 LB 12 FT Fixed Spreader Beam is a fixed length spreader beam rated to 4,000 pounds at 12 feet.

A fixed length beam like this is a straightforward choice for recurring lifts where the load dimensions do not change from one job to the next.

As a fixed length design, there is no adjustment mechanism to inspect, just a solid steel beam ready to rig.

For loads that always fall within a known width range, a fixed spreader beam is a simple, dependable choice.

Facilities ranging from small machine shops to large distribution centers keep equipment like this on hand for the lifts that come up week after week. It is the kind of tool that earns its spot on the floor by saving time on every single pick, and it pays for itself quickly once it replaces improvised rigging on a recurring job.

As with any lifting equipment, never exceed the rated working load limit, and inspect slings, hooks, shackles, and connection points before every use. Confirm compatibility with your hoist, crane, or trolley system before placing an order, and follow your facility's rigging and lockout procedures for every lift. A few minutes spent checking hardware condition and load balance up front is far cheaper than dealing with a dropped or shifted load later, and it keeps your team's daily routine consistent from one job to the next.

Properly rated hardware, stored and maintained correctly, tends to outlast the equipment it gets paired with. Building a simple habit of checking condition before each use costs very little time and pays off in fewer surprises when a piece of rigging hardware is actually under load.

The full spec sheet is below, covering capacity, dimensions, and construction details at a glance.

Add the Machining & Welding 4000 LB 12 FT Fixed Spreader Beam to your rigging inventory for dependable, repeatable spreader lifts.

Product Info:
•  Working Load Limit: 4,000 lbs
•  Beam Length: 12 ft
•  Connection: SWIVEL HOOK CONNECTIONS
•  Frame Material: Structural steel
•  Shipping Weight: 135 lbs