The Machining & Welding 4000 LB 30 FT Fixed Spreader Beam spreads your rigging across 30 feet, rated to 4,000 pounds.

Swivel hook connections at each end let you attach chain or wire rope slings quickly, keeping load angles controlled during the pick.

The beam is fabricated from structural steel with swivel hook connections, engineered to hold the full rated capacity across its length.

Spreading the rigging with a beam like this reduces sling angle stress compared to picking directly from a single hook.

From production floors to rail yards to municipal utility crews, this style of equipment gets used wherever a load needs to move safely between two points. Standardizing on purpose-built lifting equipment also makes training new operators easier, since the rigging setup stays consistent from lift to lift instead of changing based on whatever hardware happens to be nearby.

Pairing the right lifting equipment with proper technique keeps a shop's safety record intact. Inspect connection points regularly, respect the rated working load limit, and make sure every operator understands how the rigging is meant to be used before the first lift of the day. Small, consistent habits like these tend to matter more over time than any single piece of equipment, no matter how well it is built.

Durability matters as much as initial capacity when choosing rigging equipment, since hardware that wears unevenly or corrodes quickly ends up costing more over its service life. Choosing components built to recognized manufacturing standards is one of the simplest ways to avoid that added cost down the road.

See the specifications below for the exact numbers you will want to check before ordering.

The Machining & Welding 4000 LB 30 FT Fixed Spreader Beam is ready to spread your rigging and keep the next lift level.

Product Info:
•  Working Load Limit: 4,000 lbs
•  Beam Length: 30 ft
•  Connection: SWIVEL HOOK CONNECTIONS
•  Frame Material: Structural steel
•  Shipping Weight: 455 lbs