The Machining & Welding 3/8 IN Wire Rope Ferrule is a swage ferrule sized for 3/8 inch wire rope, built from carbon steel.

This sleeve is swaged with a hydraulic press to permanently secure a wire rope loop, eliminating the need for clips or knots at the termination point.

The ferrule is manufactured to precise dimensions so the swage compresses evenly around the wire rope, distributing load across the full sleeve length.

Matching ferrule material to wire rope material avoids galvanic corrosion between dissimilar metals in outdoor or wet environments.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Before putting any lifting equipment into service, verify it matches your hoist or crane setup and confirm the rated capacity covers your heaviest expected load with margin to spare. Routine inspection of welds, pins, and connection hardware helps catch wear before it becomes a safety issue. Keep a simple inspection log if your facility does not already have one, since tracking wear over time makes it easier to plan replacement before a part actually fails in use.

Properly rated hardware, stored and maintained correctly, tends to outlast the equipment it gets paired with. Building a simple habit of checking condition before each use costs very little time and pays off in fewer surprises when a piece of rigging hardware is actually under load.

The specifications below cover everything you need to check compatibility with your equipment.

Add the Machining & Welding 3/8 IN Wire Rope Ferrule to your wire rope termination supplies.

Product Info:
•  Wire Rope Diameter: 3/8 in
•  Ferrule Outer Diameter: 1.25 in
•  Ferrule Length: 2 in
•  Material: Carbon steel
•  Shipping Weight: 0.69 lbs