Built from stainless steel, the Machining & Welding 3/4 IN Wire Rope Ferrule swages onto 3/4 inch wire rope to form a rated eye or splice.

Ferrules like this compress around a wire rope loop to form a rated eye termination, a standard method for creating slings and rigging assemblies in house.

Consistent wall thickness and bore diameter keep the swage strength predictable from one ferrule to the next.

A properly swaged ferrule can achieve close to the full breaking strength of the wire rope, which loose clips generally cannot match.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Rated capacity should always be treated as a hard limit, not a target, and a quick visual inspection before each lift is one of the simplest ways to keep a lifting operation safe. Make sure your operators are trained on the specific rigging setup this equipment requires, and confirm that anyone signing off on a lift understands how to read the working load limit and match it against the actual load being moved.

Equipment that sees daily use benefits from a quick visual check every time it comes out of storage, not just during scheduled inspections. Catching a small issue, like surface corrosion or a bent component, before it becomes a larger problem keeps rigging hardware safe and in service longer.

The specifications below cover everything you need to check compatibility with your equipment.

Order the Machining & Welding 3/4 IN Wire Rope Ferrule sized to match your wire rope diameter and material.

Product Info:
•  Wire Rope Diameter: 3/4 in
•  Ferrule Outer Diameter: 1.5 in
•  Ferrule Length: 3.5 in
•  Material: Stainless steel
•  Shipping Weight: 1.46 lbs