The Machining & Welding 2000 LB 6 FT Standard Lift Beam is sized at 6 feet with a 2,000 pound rating, a solid choice for standard two-point lifts.

Swivel hooks at each end let you attach chain or wire rope slings quickly and allow the rigging to rotate naturally as the load settles.

The beam is fabricated from structural steel and finished for daily shop use, with swivel hooks welded or pinned securely at both ends.

This is the type of beam most shops keep several of on hand, since it covers the bulk of everyday two-point lifting needs.

From production floors to rail yards to municipal utility crews, this style of equipment gets used wherever a load needs to move safely between two points. Standardizing on purpose-built lifting equipment also makes training new operators easier, since the rigging setup stays consistent from lift to lift instead of changing based on whatever hardware happens to be nearby.

As with any lifting equipment, never exceed the rated working load limit, and inspect slings, hooks, shackles, and connection points before every use. Confirm compatibility with your hoist, crane, or trolley system before placing an order, and follow your facility's rigging and lockout procedures for every lift. A few minutes spent checking hardware condition and load balance up front is far cheaper than dealing with a dropped or shifted load later, and it keeps your team's daily routine consistent from one job to the next.

Properly rated hardware, stored and maintained correctly, tends to outlast the equipment it gets paired with. Building a simple habit of checking condition before each use costs very little time and pays off in fewer surprises when a piece of rigging hardware is actually under load.

See the specifications below for the exact numbers you will want to check before ordering.

Order the Machining & Welding 2000 LB 6 FT Standard Lift Beam for a fixed length beam built to do one job well, over and over.

Product Info:
•  Working Load Limit: 2,000 lbs
•  Beam Length: 6 ft
•  End Fittings: Swivel hooks
•  Frame Material: Structural steel
•  Shipping Weight: 75 lbs