The Machining & Welding 2000 LB 4 FT Standard Lift Beam covers 4 feet at 2,000 pounds capacity, giving your crew a reliable beam for daily lifting tasks.

This beam is a good match for crates, machinery, structural steel, and general freight where a simple two-point pick keeps the load level.

The beam is fabricated from structural steel and finished for daily shop use, with swivel hooks welded or pinned securely at both ends.

This is the type of beam most shops keep several of on hand, since it covers the bulk of everyday two-point lifting needs.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Rated capacity should always be treated as a hard limit, not a target, and a quick visual inspection before each lift is one of the simplest ways to keep a lifting operation safe. Make sure your operators are trained on the specific rigging setup this equipment requires, and confirm that anyone signing off on a lift understands how to read the working load limit and match it against the actual load being moved.

Equipment that sees daily use benefits from a quick visual check every time it comes out of storage, not just during scheduled inspections. Catching a small issue, like surface corrosion or a bent component, before it becomes a larger problem keeps rigging hardware safe and in service longer.

The specifications below cover everything you need to check compatibility with your equipment.

With swivel hooks ready to rig, the Machining & Welding 2000 LB 4 FT Standard Lift Beam is set to go the moment the next lift comes up.

Product Info:
•  Working Load Limit: 2,000 lbs
•  Beam Length: 4 ft
•  End Fittings: Swivel hooks
•  Frame Material: Structural steel
•  Shipping Weight: 56 lbs