The Machining & Welding 15000 LB 14 FT Twin Hoist Lift Beam is built for tandem lifting with two hoists working together. At 14 feet long and rated to 15,000 pounds, it keeps a long or heavy load balanced between two lift points.

Two hoist trolleys ride along the top of the beam while the load hangs from swivel latch hooks below, letting operators fine-tune balance by adjusting each hoist independently.

Steel construction runs the full length of the beam, engineered to carry the rated working load limit whether the load is centered or distributed toward either end.

For structural steel, piping, and long machine components, a twin hoist beam is often the safest way to keep the load level from pick to placement.

Facilities ranging from small machine shops to large distribution centers keep equipment like this on hand for the lifts that come up week after week. It is the kind of tool that earns its spot on the floor by saving time on every single pick, and it pays for itself quickly once it replaces improvised rigging on a recurring job.

As with any lifting equipment, never exceed the rated working load limit, and inspect slings, hooks, shackles, and connection points before every use. Confirm compatibility with your hoist, crane, or trolley system before placing an order, and follow your facility's rigging and lockout procedures for every lift. A few minutes spent checking hardware condition and load balance up front is far cheaper than dealing with a dropped or shifted load later, and it keeps your team's daily routine consistent from one job to the next.

Properly rated hardware, stored and maintained correctly, tends to outlast the equipment it gets paired with. Building a simple habit of checking condition before each use costs very little time and pays off in fewer surprises when a piece of rigging hardware is actually under load.

The full spec sheet is below, covering capacity, dimensions, and construction details at a glance.

With swivel latch hooks at both ends, the Machining & Welding 15000 LB 14 FT Twin Hoist Lift Beam is set up for smooth, controlled twin hoist lifts.

Product Info:
•  Working Load Limit: 15,000 lbs
•  Beam Length: 14 ft
•  End Fittings: Swivel latch hooks
•  Style: Twin hoist, dual lift point
•  Frame Material: Structural steel
•  Shipping Weight: 950 lbs