The Machining & Welding 14000 LB 96 IN-168 IN Adj Economy is an entry level adjustable lift beam suited to everyday lifting, spreading from 96 to 168 inches at 14,000 pounds.

It ships complete with shackles at each pick point, so you can rig it straight out of the box with chain or wire rope slings.

Steel construction and a straightforward pin adjustment keep the design economical while still holding the rated working load limit at any set width.

Keeping shackles attached at both ends reduces the parts you need to track and reduces setup time before each lift.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Good lifting practice starts before the load ever leaves the ground: confirm the working load limit fits the job, check that all hardware is in good condition, and keep the load centered to avoid uneven strain on the rigging. These habits matter as much as the equipment itself, and they cost nothing beyond a few extra minutes of attention before each pick, which is a fair trade for a safer shop floor.

Properly rated hardware, stored and maintained correctly, tends to outlast the equipment it gets paired with. Building a simple habit of checking condition before each use costs very little time and pays off in fewer surprises when a piece of rigging hardware is actually under load.

See the specifications below for the exact numbers you will want to check before ordering.

Add the Machining & Welding 14000 LB 96 IN-168 IN Adj Economy to your rigging lineup and cover a range of load widths without the cost of a heavy duty beam.

Product Info:
•  Working Load Limit: 14,000 lbs
•  Adjustable Length Range: 96 in to 168 in
•  End Fittings: Shackles, included
•  Frame Material: Structural steel
•  Shipping Weight: 965 lbs