The Machining & Welding 2000 LB 60 IN-96 IN Adj Economy is a budget-friendly adjustable lift beam that extends from 60 to 96 inches, rated at 2,000 pounds working load limit.

The shackle end fittings accept standard slings, so changeover from one job to the next is quick without swapping hardware.

Shackles are fixed at both ends of the beam, so the only field adjustment needed is setting the overall spread with the locking pin.

This is a practical first beam for a shop that needs adjustable spread lifting but does not yet need a high capacity or specialty design.

Equipment like this shows up across a wide range of industries, from steel fabrication and machine shops to warehousing, construction, and vehicle service centers. Anywhere crews need to move a load overhead in a controlled, repeatable way, a purpose-built lift beam or crane keeps the job safer and faster than improvised rigging. Once a facility standardizes on the right lifting equipment for its typical loads, operators spend less time rigging and more time actually getting work done.

Before putting any lifting equipment into service, verify it matches your hoist or crane setup and confirm the rated capacity covers your heaviest expected load with margin to spare. Routine inspection of welds, pins, and connection hardware helps catch wear before it becomes a safety issue. Keep a simple inspection log if your facility does not already have one, since tracking wear over time makes it easier to plan replacement before a part actually fails in use.

Durability matters as much as initial capacity when choosing rigging equipment, since hardware that wears unevenly or corrodes quickly ends up costing more over its service life. Choosing components built to recognized manufacturing standards is one of the simplest ways to avoid that added cost down the road.

See the specifications below for the exact numbers you will want to check before ordering.

Order the Machining & Welding 2000 LB 60 IN-96 IN Adj Economy for a beam that adjusts to the load and ships with the shackles already attached.

Product Info:
•  Working Load Limit: 2,000 lbs
•  Adjustable Length Range: 60 in to 96 in
•  End Fittings: Shackles, included
•  Frame Material: Structural steel
•  Shipping Weight: 150 lbs