The Machining & Welding 100000 LB 20 FT Fixed Spreader Beam is a fixed length spreader beam rated to 100,000 pounds at 20 feet.

This beam suits loads that are wider than a single sling point can safely support, spreading the rigging to keep the load level and the sling angles closer to vertical.

As a fixed length design, there is no adjustment mechanism to inspect, just a solid steel beam ready to rig.

For loads that always fall within a known width range, a fixed spreader beam is a simple, dependable choice.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Rated capacity should always be treated as a hard limit, not a target, and a quick visual inspection before each lift is one of the simplest ways to keep a lifting operation safe. Make sure your operators are trained on the specific rigging setup this equipment requires, and confirm that anyone signing off on a lift understands how to read the working load limit and match it against the actual load being moved.

Properly rated hardware, stored and maintained correctly, tends to outlast the equipment it gets paired with. Building a simple habit of checking condition before each use costs very little time and pays off in fewer surprises when a piece of rigging hardware is actually under load.

Details on capacity, dimensions, and hardware are listed below for a quick comparison against your requirements.

The Machining & Welding 100000 LB 20 FT Fixed Spreader Beam is ready to spread your rigging and keep the next lift level.

Product Info:
•  Working Load Limit: 100,000 lbs
•  Beam Length: 20 ft
•  Connection: SHACKLE CONNECTIONS
•  Frame Material: Structural steel
•  Shipping Weight: 1050 lbs