Built for consistent, repeatable lifts, the Machining & Welding 100000 LB 12 FT Fixed Spreader Beam spans 12 feet at a 100,000 pound working load limit.

This beam suits loads that are wider than a single sling point can safely support, spreading the rigging to keep the load level and the sling angles closer to vertical.

Steel construction throughout keeps deflection low under load, and the swivel connections allow the rigging to settle naturally as the load lifts.

For loads that always fall within a known width range, a fixed spreader beam is a simple, dependable choice.

Maintenance departments, fabrication shops, warehouses, and construction crews all rely on equipment in this category to handle lifts that come up again and again. Having the right beam or crane on hand means operators are not left rigging a load with mismatched slings or borrowed hardware, which keeps every lift consistent regardless of who is running it that day.

Before putting any lifting equipment into service, verify it matches your hoist or crane setup and confirm the rated capacity covers your heaviest expected load with margin to spare. Routine inspection of welds, pins, and connection hardware helps catch wear before it becomes a safety issue. Keep a simple inspection log if your facility does not already have one, since tracking wear over time makes it easier to plan replacement before a part actually fails in use.

Properly rated hardware, stored and maintained correctly, tends to outlast the equipment it gets paired with. Building a simple habit of checking condition before each use costs very little time and pays off in fewer surprises when a piece of rigging hardware is actually under load.

See the specifications below for the exact numbers you will want to check before ordering.

Order the Machining & Welding 100000 LB 12 FT Fixed Spreader Beam for a straightforward 12 foot spreader beam rated to 100,000 pounds.

Product Info:
•  Working Load Limit: 100,000 lbs
•  Beam Length: 12 ft
•  Connection: SHACKLE CONNECTIONS
•  Frame Material: Structural steel
•  Shipping Weight: 715 lbs