When you need adjustable spread without the cost of a heavy duty beam, the Machining & Welding 10000 LB 60 IN-120 IN Adj Economy covers 60 to 120 inches at 10,000 pounds capacity.

Because the spread is adjustable, one beam covers a range of load widths that would otherwise require several fixed-length beams on hand.

Steel construction and a straightforward pin adjustment keep the design economical while still holding the rated working load limit at any set width.

This is a practical first beam for a shop that needs adjustable spread lifting but does not yet need a high capacity or specialty design.

Equipment like this shows up across a wide range of industries, from steel fabrication and machine shops to warehousing, construction, and vehicle service centers. Anywhere crews need to move a load overhead in a controlled, repeatable way, a purpose-built lift beam or crane keeps the job safer and faster than improvised rigging. Once a facility standardizes on the right lifting equipment for its typical loads, operators spend less time rigging and more time actually getting work done.

As with any lifting equipment, never exceed the rated working load limit, and inspect slings, hooks, shackles, and connection points before every use. Confirm compatibility with your hoist, crane, or trolley system before placing an order, and follow your facility's rigging and lockout procedures for every lift. A few minutes spent checking hardware condition and load balance up front is far cheaper than dealing with a dropped or shifted load later, and it keeps your team's daily routine consistent from one job to the next.

Equipment that sees daily use benefits from a quick visual check every time it comes out of storage, not just during scheduled inspections. Catching a small issue, like surface corrosion or a bent component, before it becomes a larger problem keeps rigging hardware safe and in service longer.

See the specifications below for the exact numbers you will want to check before ordering.

Add the Machining & Welding 10000 LB 60 IN-120 IN Adj Economy to your rigging lineup and cover a range of load widths without the cost of a heavy duty beam.

Product Info:
•  Working Load Limit: 10,000 lbs
•  Adjustable Length Range: 60 in to 120 in
•  End Fittings: Shackles, included
•  Frame Material: Structural steel
•  Shipping Weight: 465 lbs