Built for demanding lifting schedules, the Machining & Welding 10000 LB 120 IN-144 IN Adjustable Lift adjusts between 120 and 144 inches while holding a 10,000 pound working load limit.

This beam is a common fit for shops with varied production runs, where load dimensions change often enough that a fixed beam would not keep up.

The beam uses a telescoping steel section with a locking pin, built heavier than economy models to hold up under repeated industrial use.

A heavier duty adjustable design like this one is built to hold up to frequent width changes without the wear a lighter economy beam would show.

From production floors to rail yards to municipal utility crews, this style of equipment gets used wherever a load needs to move safely between two points. Standardizing on purpose-built lifting equipment also makes training new operators easier, since the rigging setup stays consistent from lift to lift instead of changing based on whatever hardware happens to be nearby.

Good lifting practice starts before the load ever leaves the ground: confirm the working load limit fits the job, check that all hardware is in good condition, and keep the load centered to avoid uneven strain on the rigging. These habits matter as much as the equipment itself, and they cost nothing beyond a few extra minutes of attention before each pick, which is a fair trade for a safer shop floor.

Well-built rigging hardware holds its rated capacity through years of regular use, provided it is inspected and stored properly between jobs. A dry, organized storage area away from corrosive chemicals or extreme temperature swings goes a long way toward extending the service life of steel components.

See the specifications below for the exact numbers you will want to check before ordering.

Add the Machining & Welding 10000 LB 120 IN-144 IN Adjustable Lift to jobs where load dimensions change often enough to make a fixed beam impractical.

Product Info:
•  Working Load Limit: 10,000 lbs
•  Adjustable Length Range: 120 in to 144 in
•  End Fittings: Shackles
•  Frame Material: Structural steel
•  Shipping Weight: 805 lbs