The Machining & Welding 10000 LB 6 FT Twin Hoist Lift Beam is built for tandem lifting with two hoists working together. At 6 feet long and rated to 10,000 pounds, it keeps a long or heavy load balanced between two lift points.

Two hoist trolleys ride along the top of the beam while the load hangs from swivel latch hooks below, letting operators fine-tune balance by adjusting each hoist independently.

The beam is fabricated from structural steel with swivel latch hooks at the load connection points, letting the rigging pivot naturally as the load shifts during the lift.

This approach lets shops handle oversized loads using two hoists they already have, instead of investing in a single higher capacity unit.

From production floors to rail yards to municipal utility crews, this style of equipment gets used wherever a load needs to move safely between two points. Standardizing on purpose-built lifting equipment also makes training new operators easier, since the rigging setup stays consistent from lift to lift instead of changing based on whatever hardware happens to be nearby.

Before putting any lifting equipment into service, verify it matches your hoist or crane setup and confirm the rated capacity covers your heaviest expected load with margin to spare. Routine inspection of welds, pins, and connection hardware helps catch wear before it becomes a safety issue. Keep a simple inspection log if your facility does not already have one, since tracking wear over time makes it easier to plan replacement before a part actually fails in use.

Durability matters as much as initial capacity when choosing rigging equipment, since hardware that wears unevenly or corrodes quickly ends up costing more over its service life. Choosing components built to recognized manufacturing standards is one of the simplest ways to avoid that added cost down the road.

The specifications below cover everything you need to check compatibility with your equipment.

The Machining & Welding 10000 LB 6 FT Twin Hoist Lift Beam is ready to give your crew independent control over both ends of a long or heavy load.

Product Info:
•  Working Load Limit: 10,000 lbs
•  Beam Length: 6 ft
•  End Fittings: Swivel latch hooks
•  Style: Twin hoist, dual lift point
•  Frame Material: Structural steel
•  Shipping Weight: 300 lbs