For loads too long or too heavy for one hoist, the Machining & Welding 10000 LB 16 FT Twin Hoist Lift Beam spans 16 feet and carries a 10,000 pound working load limit across two lift points.

Two hoist trolleys ride along the top of the beam while the load hangs from swivel latch hooks below, letting operators fine-tune balance by adjusting each hoist independently.

Steel construction runs the full length of the beam, engineered to carry the rated working load limit whether the load is centered or distributed toward either end.

Splitting a long or heavy lift between two hoists reduces stress on any single point of rigging and gives you more control over how the load travels.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

As with any lifting equipment, never exceed the rated working load limit, and inspect slings, hooks, shackles, and connection points before every use. Confirm compatibility with your hoist, crane, or trolley system before placing an order, and follow your facility's rigging and lockout procedures for every lift. A few minutes spent checking hardware condition and load balance up front is far cheaper than dealing with a dropped or shifted load later, and it keeps your team's daily routine consistent from one job to the next.

Properly rated hardware, stored and maintained correctly, tends to outlast the equipment it gets paired with. Building a simple habit of checking condition before each use costs very little time and pays off in fewer surprises when a piece of rigging hardware is actually under load.

See the specifications below for the exact numbers you will want to check before ordering.

The Machining & Welding 10000 LB 16 FT Twin Hoist Lift Beam is ready to give your crew independent control over both ends of a long or heavy load.

Product Info:
•  Working Load Limit: 10,000 lbs
•  Beam Length: 16 ft
•  End Fittings: Swivel latch hooks
•  Style: Twin hoist, dual lift point
•  Frame Material: Structural steel
•  Shipping Weight: 1040 lbs