The Machining & Welding 1000 LB 42 IN Economy Lift Beam is sized at 42 inches with a 1,000 pound rating, an economical option for routine two-point lifts.

With only 10.25 inches of headroom, the beam keeps rigging height to a minimum, which helps when your hoist hook does not have much room to spare.

The beam's low headroom profile is built into the steel cross-section itself, not added on, keeping the unit compact and durable.

Low headroom design recovers usable hook travel in shops where ceiling clearance is already limited.

From production floors to rail yards to municipal utility crews, this style of equipment gets used wherever a load needs to move safely between two points. Standardizing on purpose-built lifting equipment also makes training new operators easier, since the rigging setup stays consistent from lift to lift instead of changing based on whatever hardware happens to be nearby.

Rated capacity should always be treated as a hard limit, not a target, and a quick visual inspection before each lift is one of the simplest ways to keep a lifting operation safe. Make sure your operators are trained on the specific rigging setup this equipment requires, and confirm that anyone signing off on a lift understands how to read the working load limit and match it against the actual load being moved.

Properly rated hardware, stored and maintained correctly, tends to outlast the equipment it gets paired with. Building a simple habit of checking condition before each use costs very little time and pays off in fewer surprises when a piece of rigging hardware is actually under load.

Details on capacity, dimensions, and hardware are listed below for a quick comparison against your requirements.

Add the Machining & Welding 1000 LB 42 IN Economy Lift Beam to your rack for the low headroom picks that come up more often than you would expect.

Product Info:
•  Working Load Limit: 1,000 lbs
•  Beam Length: 42 in
•  Headroom: 10.25 in
•  Frame Material: Structural steel
•  Shipping Weight: 30 lbs