The Machining & Welding 1-3/8 IN Wire Rope Thr Stud is a threaded terminal fitting sized for 1-3/8 inch wire rope, swaged onto a 8.25 inch stud with 2-3/4 inch fine thread and a right-hand thread direction.

Threaded studs like this terminate a wire rope end with a machine thread instead of a hook or eye, letting you thread the assembly directly into a fitting, turnbuckle, or clevis.

Manufactured to consistent tolerances, the fitting swages onto the wire rope with a rated holding strength that matches the rope it is paired with.

Choosing left-hand or right-hand thread correctly prevents an assembly from backing itself loose in service, which is why this detail is called out specifically.

Facilities ranging from small machine shops to large distribution centers keep equipment like this on hand for the lifts that come up week after week. It is the kind of tool that earns its spot on the floor by saving time on every single pick, and it pays for itself quickly once it replaces improvised rigging on a recurring job.

Rated capacity should always be treated as a hard limit, not a target, and a quick visual inspection before each lift is one of the simplest ways to keep a lifting operation safe. Make sure your operators are trained on the specific rigging setup this equipment requires, and confirm that anyone signing off on a lift understands how to read the working load limit and match it against the actual load being moved.

Rigging hardware like this sees repeated use, so look for equipment that is properly rated, clearly marked, and traceable to a manufacturer that stands behind its specifications. Keeping documentation on hand for each piece of equipment also makes routine inspections and any future certification requirements easier to manage.

Full specifications are listed below so you can confirm fit against your current rigging before it ships.

Add the Machining & Welding 1-3/8 IN Wire Rope Thr Stud to your wire rope assembly parts inventory.

Product Info:
•  Wire Rope Diameter: 1-3/8 in
•  Stud Length: 8.25 in
•  Thread Size: 2-3/4 in
•  Thread Pitch: Fine
•  Thread Hand: Right-hand
•  Shipping Weight: 30.5 lbs