The Machining & Welding 1-3/4 IN 2-Leg Wr Bridle is a 2-leg wire rope bridle sling built from 1-3/4 inch wire rope.

This bridle is built for loads with multiple lift points, keeping tension distributed evenly across each leg during the pick.

Wire rope construction throughout gives the bridle strength and durability, with end fittings engineered to hold the rated capacity of each leg.

Wire rope bridles are a go-to choice when a load needs to be picked from more than two points and durability matters more than sling weight.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Good lifting practice starts before the load ever leaves the ground: confirm the working load limit fits the job, check that all hardware is in good condition, and keep the load centered to avoid uneven strain on the rigging. These habits matter as much as the equipment itself, and they cost nothing beyond a few extra minutes of attention before each pick, which is a fair trade for a safer shop floor.

Rigging hardware like this sees repeated use, so look for equipment that is properly rated, clearly marked, and traceable to a manufacturer that stands behind its specifications. Keeping documentation on hand for each piece of equipment also makes routine inspections and any future certification requirements easier to manage.

The full spec sheet is below, covering capacity, dimensions, and construction details at a glance.

Add the Machining & Welding 1-3/4 IN 2-Leg Wr Bridle to your rigging kit for dependable, multi-leg wire rope lifting.

Product Info:
•  Working Load Limit: 70,000 lbs
•  Wire Rope Diameter: 1-3/4 in
•  Legs: 2
•  Connection: 70,000 LB WLL AT 45 DEG
•  Shipping Weight: See product tag