Hook Washer “ SKU: 682 The Precision Washer That Retains U-Frame Components in Perfect Operating Position In a high-capacity ratchet winch hoist, washers aren't passive hardware ” they are precision spacers and retention interfaces that keep the entire sub-assembly aligned and functional under load. The Hook Washer (SKU: 682) is the genuine OEM replacement washer for the Lug-All model 6000-15, serving as the retaining washer within the U-frame pawl sub-assembly that keeps the reverse lever and adjacent components correctly positioned on the U-frame pawl shaft. This hook washer is compatible with Lug-All model 6000-15 only, priced at $3.50 per unit. Hfgp The Lug-All model 6000-15 is a heavy-duty, industrial-grade 3-ton cable come along hoist ” delivering 3,000 lbs in single line with 15 feet of cable, or 6,000 lbs in double line with 7 feet 6 inches of cable. Lug-All Per the official 6000-15SH parts list, the retaining washer (Part #682) is listed at reference position #16 ” installed on the U-frame pawl shaft directly after the reverse lever (#681) and before the shaft snap washers (#671). In this position, the washer bears against the reverse lever's hub face, distributing axial load from the C-clip snap washers over a wider contact area and preventing the lever from sitting directly against the snap washer's smaller bearing surface. Without this washer, the snap washer would bear against the lever casting directly ” concentrating stress and accelerating wear at the lever's hub face with every operating cycle. Lug-All The U-frame pawl sub-assembly on the 6000-15 must maintain precise axial spacing between all of its components ” the U-frame pawl shaft, spring support roll, U-frame pawl, reverse lever, retaining washer, shaft snap washers, and U-frame pawl spring ” to ensure the pawl engages the drum ratchet teeth at the correct angle and depth. The 6000-15 features a double interlocking pawl mechanism that ensures one pawl is always holding the load ” and that guarantee depends on every component in the U-frame pawl sub-assembly, including this washer, being present and in good condition. Rigging Warehouse A missing, deformed, or incorrectly sized washer changes the axial spacing of the sub-assembly, causing the U-frame pawl to engage the drum ratchet at a shifted position ” leading to inconsistent ratchet advance, premature tooth wear, and in extreme cases, pawl skip under load at 3-ton capacity. Using authentic Lug-All replacement parts means sustaining the original design integrity of your unit ” the cast-aluminum structure, robust pawl assemblies, and reliable hardware that make Lug-All hoists a trusted choice in demanding industrial, construction, and utility settings. Lug-All

Product Specifications SpecificationDetailSKU / Part Number682Part NameHook Washer (Retaining Washer)Compatible ModelLug-All #6000-15 onlyParts List ReferencePosition #16 (6000-15SH parts list)Hoist Type3-Ton Cable Ratchet Winch HoistHoist Capacity (Single Line)3,000 lbsHoist Capacity (Double Line)6,000 lbsLocationU-Frame Pawl Shaft ” between Reverse Lever and C-ClipsWorks WithReverse Lever #681, Shaft Snap Washers #671Component CategoryU-Frame Hardware / Shaft RetentionCountry of OriginUSA

Installation Note When servicing the U-frame pawl sub-assembly, always confirm the retaining washer is present and seated flat against the reverse lever hub before installing the shaft snap washers (SKU: 671). Never omit this washer during reassembly ” even a temporary absence changes component spacing and compromises the U-frame pawl's engagement geometry. Order SKU 682 today and keep your Lug-All 6000-15 U-frame assembly correctly spaced and fully functional at 3-ton capacity.