Drum Shaft “ SKU: 652 The Central Load-Bearing Axle That Holds Your 3-Ton Hoist Drum in Perfect Alignment In a ratchet winch hoist, the drum shaft is the foundational axle that the drum rotates around ” and at 3-ton capacity, that shaft bears enormous mechanical stress with every stroke. The Drum Shaft (SKU: 652) is the genuine OEM replacement shaft engineered specifically for the Lug-All model 6000-15, the heaviest-duty portable come-along in the Lug-All lineup. This drum shaft is compatible with Lug-All model 6000-15 only. Lug-All The Lug-All model 6000-15 is a heavy-duty, industrial-grade 3-ton cable come along hoist featuring double or single line lift capabilities ” delivering 3,000 lbs with 15 feet of cable in single line, or 6,000 lbs with 7 feet 6 inches of cable in double line. ShoreLandr Per the official 6000-15SH parts list, the drum shaft (Part #652) is secured in the main frame by a drum shaft retaining ring set (Part #653) ” a set of two retaining rings that lock the shaft in place axially, preventing any longitudinal movement under load. The drum rotates around this shaft while the shaft itself remains fixed within the main frame's bushed bores ” transferring the rotational force from every handle stroke directly into controlled cable winding and load movement. J Harlen Co. The cable return crank on Lug-All cable hoists attaches directly to the drum shaft for slack cable take-up ” meaning the shaft also serves as the mechanical interface for optional crank operation, a key feature on heavy-capacity models where rewinding long cable runs by hand is time-consuming. A worn, bent, or corroded drum shaft that doesn't seat properly in the main frame bushings creates drum wobble, uneven cable layering, accelerated bearing wear, and potential for the retaining rings to disengage under load. J Harlen Co. The 6000-15 uses a 7×19 highly flexible self-storing aircraft cable on its drum ” and consistent, accurate cable lay onto the drum from turn to turn depends entirely on a straight, properly dimensioned drum shaft maintaining perfect drum alignment throughout the entire winding cycle. Lug-All Using authentic Lug-All replacement parts means sustaining the original design integrity of your unit ” the cast-aluminum structure, robust pawl assemblies, and reliable hardware that make Lug-All hoists a trusted choice in demanding industrial, construction, and utility settings. Lug-All

Product Specifications SpecificationDetailSKU / Part Number652Part NameDrum ShaftCompatible ModelLug-All #6000-15 onlyHoist Type3-Ton Cable Ratchet Winch HoistHoist Capacity (Single Line)3,000 lbsHoist Capacity (Double Line)6,000 lbsSecured ByDrum Shaft Retaining Ring Set #653 (sold separately)Cable Diameter5/16" (7×19 aircraft cable)Component CategoryDrum / Drive AssemblyCountry of OriginUSA

Installation Note When replacing the drum shaft, always install a new drum shaft retaining ring set (SKU: 653) ” never reuse worn or previously compressed retaining rings, as they may not provide the required locking force at full 3-ton capacity. Inspect the main frame bushings at the same time. Order SKU 652 today and restore full rotational precision and load capacity to your Lug-All 6000-15.