Spring Support Roll “ SKU: 683 The Tapered Roller That Precisely Positions the U-Frame Pawl Spring on Your 3-Ton Hoist Inside the U-frame pawl sub-assembly of the Lug-All model 6000-15, every component has a precise role ” and the spring support roll is the engineered interface between the U-frame pawl shaft and the U-frame pawl spring that makes automatic pawl engagement possible. The Spring Support Roll (SKU: 683) is the genuine OEM replacement roller that maintains correct spring geometry and pawl alignment in the U-frame assembly of Lug-All's most powerful cable hoist. Per the official 6000-15SH parts list, the spring support roll (Part #683) is listed at reference position #13, installed on the U-frame pawl shaft immediately before the U-frame pawl (#679) in the assembly sequence. Lug-All The Lug-All model 6000-15 is a heavy-duty, industrial-grade 3-ton cable come along hoist ” delivering 3,000 lbs in single line with 15 feet of cable, or 6,000 lbs in double line with 7 feet 6 inches of cable. Lug-All During U-frame pawl assembly, the spring support roll is slid onto the U-frame pawl shaft tapered end first, followed by the U-frame pawl and the reversing lever ” the tapered geometry of the roll ensures it seats correctly against the pawl casting, providing the shaped bearing surface that the U-frame pawl spring bears against. This shaped contact surface is what allows the spring to apply its force at the correct angle to the pawl ” keeping the pawl tip pressed firmly against the drum ratchet teeth throughout the complete arc of handle travel, from the beginning of each forward stroke to the reset position at the end of the return stroke. Certex When performing a U-frame pawl replacement, the spring support roll is one of the components that should be saved from the original assembly when it is still in good condition, or replaced if worn ” confirming that the spring support roll is a serviceable, inspectable component that directly affects the quality of spring-to-pawl contact. Certex A worn, deformed, or missing spring support roll changes the spring contact geometry ” causing the U-frame pawl spring to bear unevenly against the pawl casting, creating a biased or reduced return force that allows the pawl to lag on return, miss tooth engagement on fast or light-load strokes, or fail to fully re-engage after a lowering operation. The 6000-15 features a double interlocking pawl mechanism that ensures one pawl is always holding the load ” and consistent U-frame pawl spring force, properly distributed by the spring support roll, is what keeps that guarantee intact at 3-ton capacity. Rigging Warehouse Using authentic Lug-All replacement parts means sustaining the original design integrity of your unit ” the cast-aluminum structure, robust pawl assemblies, and reliable hardware that make Lug-All hoists a trusted choice in demanding industrial, construction, and utility settings. Lug-All

Product Specifications SpecificationDetailSKU / Part Number683Part NameSpring Support RollCompatible ModelLug-All #6000-15 onlyParts List ReferencePosition #13 (6000-15SH parts list)Hoist Type3-Ton Cable Ratchet Winch HoistHoist Capacity (Single Line)3,000 lbsHoist Capacity (Double Line)6,000 lbsInstallation OrientationTapered end first onto U-Frame Pawl ShaftWorks WithU-Frame Pawl #679, U-Frame Pawl Spring #195, Pawl Shaft #680Component CategoryU-Frame / Pawl Spring InterfaceCountry of OriginUSA

Service Tip When replacing the U-frame pawl, inspect the spring support roll carefully and replace it if worn or deformed. A serviceable spring support roll may be reused, but a worn one should always be replaced along with the pawl for best results. Certex Order SKU 683 today and keep your Lug-All 6000-15 U-frame pawl spring properly supported for precise, reliable ratchet engagement.