Shear Pin “ SKU: 677 Replace It After Every Overload ” The 6000-15's First and Most Critical Safety Component When your Lug-All 6000-15 encounters an overload, the shear pin is the component that responds first ” and it does so with an audible snap that tells you immediately to stop and release the load. The Shear Pin (SKU: 677) is the genuine OEM replacement shear pin for the 6000-15, precision-calibrated to protect your hoist, your load, and your crew the moment rated capacity is exceeded. Per the official 6000-15SH parts list, the shear pin (Part #677) is listed at reference position #20, located between the U-frame and handle socket ” the structural junction through which every ounce of handle force passes into the ratchet drive mechanism. Lug-All The Lug-All model 6000-15 is a heavy-duty, industrial-grade 3-ton cable come along hoist ” delivering 3,000 lbs in single line with 15 feet of cable, or 6,000 lbs in double line with 7 feet 6 inches of cable. Lug-All The 6000-15 features an easily replaceable shear pin that breaks with an audible noise to warn of serious overload conditions ” giving the operator an unmistakable signal before any structural damage occurs to the hoist or rigging system. This is a key distinction of the 6000-15 versus web strap hoist models: rather than a breakable stress link system, the cable model uses a shear pin mounted at the U-frame interface, which snaps cleanly under overload shear force and can be replaced in the field within seconds. Lug-All After the shear pin breaks, the come-along remains operational so the load can be reduced as soon as possible ” before the hoist handle bends, further protecting the tool investment. This is the three-layer protection sequence by design: the shear pin snaps first as the audible alert, then the handle begins to bend at 125 “150% of capacity as a visible warning, and finally, the structural components of the hoist are the last line of defense. Skipping the shear pin replacement puts all that overload stress directly on the handle and frame with no early warning. GME Supply Replacement is straightforward ” the shear pin slides into its bore in the handle socket, and the entire field service operation requires no specialized tools. Keeping multiple spare pins on hand is standard practice for linemen, riggers, and construction crews who deploy the 6000-15 in demanding multi-pull operations where overload events are more likely. Lug-All Using authentic Lug-All replacement parts means sustaining the original design integrity of your unit ” the cast-aluminum structure, robust pawl assemblies, and reliable hardware that make Lug-All hoists a trusted choice in demanding industrial, construction, and utility settings. Lug-All

Product Specifications SpecificationDetailSKU / Part Number677Part NameShear PinCompatible ModelLug-All #6000-15 onlyParts List ReferencePosition #20 (6000-15SH parts list)LocationBetween U-Frame and Handle SocketHoist Type3-Ton Cable Ratchet Winch HoistHoist Capacity (Single Line)3,000 lbsHoist Capacity (Double Line)6,000 lbsActivation SignalAudible snap at overload thresholdComponent CategoryHandle Assembly / Overload ProtectionCountry of OriginUSA

Critical Safety Reminder Never substitute a hardware-store pin, bolt, or roll pin for the OEM shear pin. A substitute of incorrect material or cross-section will not break at the calibrated overload threshold ” eliminating the early-warning function entirely and placing your hoist, load, and crew at serious risk. Order SKU 677 today and keep your Lug-All 6000-15's overload protection system calibrated and ready for work.