SKU: 749 | Reversible Handle ” Compatible with Lug-All Models 500-A and 500-i (1/4-Ton Lightweight Web Strap Hoists) Restore Precise Load Control in Your Compact Hoist ” OEM Reversible Handle for the 500-A and 500-i The handle is your direct mechanical connection to every lift, lower, and tensioning operation your hoist performs ” and in a compact Lightweight series hoist, it also serves as your primary overload protection device. The SKU 749 Reversible Handle is a genuine OEM replacement part designed specifically for the Lug-All model 500-A, a 1/4-ton web strap winch hoist with 16 feet of web strap and a 500-pound single line capacity that is small enough to fit in the seat compartment of an off-road vehicle such as a snowmobile or 4x4, and the model 500-i, a 1/4-ton web strap winch hoist with 16 feet of web strap and a 500-pound capacity that also includes eyebolts to avoid hook-to-hook connections. If your handle is bent, cracked, stripped at the socket, or otherwise compromised, replacing it with the correct OEM part restores full ratcheting function and the hoist's built-in overload protection in one straightforward repair. Lug-AllLug-All What makes the reversible handle distinctively valuable is its dual-directional design. Rather than requiring a separate mechanism to switch between lifting and lowering operations, the reversible handle can be flipped to change the ratchet direction ” giving operators smooth, intuitive control over both upward and downward load movement without adjusting any additional components. The 500-A offers three operational modes: lifting or tensioning, lowering or backing off, and free release to unwind the web strap from the drum ” and switching the handle from standard to reverse position is how the operator gains full function in circumstances where the handle may not get a full range of motion. A worn or damaged reversible handle directly limits your ability to switch between these modes reliably, reducing the overall utility and safety of your hoist. Amazon The handle also plays a critical safety role in the Lug-All Lightweight design. All Lug-All web strap hoists are made in the USA, and in the 500-series models specifically, if the model is significantly overloaded, the handle will bend to protect the operator and the come along winch hoist itself. This deliberate engineered failure point ” the handle bending before the hoist frame or strap is damaged ” is a defining safety feature of the Lightweight line. A bent handle is therefore not just a damaged part; it is a signal that an overload event has occurred and that the handle must be replaced before the hoist is returned to service. Operating with a pre-bent handle means that overload protection has already been used and is no longer functional. Lug-AllAmazon The Lug-All Lightweight line consists of industrial-grade hoists that are more compact than other models, built for applications where portability and maneuverability matter as much as capacity ” from off-road recovery to tight utility installations and field maintenance tasks. The reversible handle is a key part of what makes these hoists so operationally versatile in those environments. Lug-All Using authentic Lug-All replacement parts means sustaining the original design integrity of your unit ” the cast-aluminum structure, robust pawl assemblies, and reliable hardware that make Lug-All hoists a trusted choice in demanding industrial, construction, and utility settings. Lug-All

Product Specifications SpecificationDetailSKU749Part NameReversible HandleCompatible ModelsLug-All 500-A and 500-iHoist LineLug-All Lightweight SeriesHoist Capacity1/4 Ton ” 500 lbs (single line)Web Strap Length16 FTHandle FunctionReversible ” switches between lift and lower modesOverload Safety FeatureBends at overload to protect operator and equipment500-i Special FeatureEyebolts included to avoid hook-to-hook connectionsPart TypeOEM Replacement ComponentCountry of ManufactureUSA

A Bent Handle Is a Signal ” Not Just a Repair If you are replacing your SKU 749 handle because it bent during use, take a moment before reinstalling to inspect the drum, strap, pawl, and main frame for any signs of stress, deformation, or damage caused by the overload event. Regular maintenance and inspection of hoist parts are essential for ensuring safe and efficient operation, and addressing wear or malfunctions promptly contributes to the longevity and reliability of the hoist system. Replace the handle with this correct OEM part, complete your inspection, and return your 500-A or 500-i to service with full confidence in its structural integrity and safety. BH-USA This reversible handle is compatible with Lug-All models 500-A and 500-i only. Please verify your hoist model number before ordering.