Pulley Block Yoke “ SKU: 684 The Structural Housing That Anchors the Pulley Block in Your 3-Ton Hoist's Double-Line System When you convert your Lug-All 6000-15 from single-line to double-line operation, the pulley block becomes the critical lower rigging point ” and the pulley block yoke is the forged structural frame that holds the entire pulley block assembly together. The Pulley Block Yoke (SKU: 684) is the genuine OEM replacement yoke casting exclusively for the 6000-15, the component that houses the pulley, accepts the lower hook, and anchors the complete double-line pulley system at 6,000 lbs of rated capacity. This pulley block yoke is compatible with Lug-All model 6000-15 only, priced at $100.75. Lincolnhoist The Lug-All model 6000-15 is a heavy-duty, industrial-grade 3-ton cable come along hoist ” delivering 3,000 lbs in single line with 15 feet of cable, or 6,000 lbs in double line with 7 feet 6 inches of cable. Lug-All Per the official 6000-15SH parts list, the yoke (Part #684) is listed at reference position #36 in the pulley block sub-assembly, working in direct combination with the shaft locking pin (#687), pulley with bushing (#685), and pulley shaft (#686) to form the complete pulley block assembly. The yoke is the outer structural casting of this sub-assembly ” it contains the bores through which the pulley shaft passes, retains the shaft locking pin in its groove, and provides the shank or eye mount point for the lower hook system. All of the 6,000-lb double-line load passes through this casting as the cable wraps around the pulley and the lower hook bears against the load anchor point below. Lug-All At 6,000 lbs of double-line load, the yoke is subjected to the combined bending and tensile stresses from both the cable wrap force and the direct downward pull of the load through the hook. A cracked or deformed yoke is an immediate out-of-service condition ” the pulley block must not be used at any load until the yoke is replaced with a genuine OEM component. The SKU 684 is specific to the 6000-15's large-frame pulley block geometry. Other Lug-All models use different pulley block yokes sized to their own cable diameter and frame specifications ” the SKU 573-SP serves models 3-A, 3-B, 4-A, and 4-B, while other yoke part numbers cover the remaining model families ” confirming the 6000-15 yoke is not interchangeable across models. Lug-All Using authentic Lug-All replacement parts means sustaining the original design integrity of your unit ” the cast-aluminum structure, robust pawl assemblies, and reliable hardware that make Lug-All hoists a trusted choice in demanding industrial, construction, and utility settings. Lug-All

Product Specifications SpecificationDetailSKU / Part Number684Part NamePulley Block YokeCompatible ModelLug-All #6000-15 onlyParts List ReferencePosition #36 (6000-15SH parts list)Hoist Type3-Ton Cable Ratchet Winch HoistHoist Capacity (Double Line)6,000 lbsWorks WithPulley W/Bushing #685, Pulley Shaft #686, Shaft Locking Pin #687Component CategoryPulley Block / Double-Line Lower AssemblyCountry of OriginUSA

Model Exclusivity Note The SKU 684 Pulley Block Yoke is exclusively for the 6000-15 large-frame pulley block. It is not interchangeable with yokes for any other Lug-All hoist model. For the complete pulley block assembly, see the Pulley Block Assembly for the 6000-15. Order SKU 684 today and restore the structural integrity of your Lug-All 6000-15 double-line pulley block at full 6,000-lb capacity.