Built as a 6 by 8 foot triangle to triangle assembly, the Machining & Welding Tri-Tri Wire Mesh Sling 6X8 FT carries a 7,200 pound working load limit.

This sling can be rigged as a straight vertical lift or as a choker hitch, giving you two ways to secure a load with the same piece of equipment.

End fittings are rated to match the mesh body, so the complete assembly carries a consistent working load limit from end to end.

Wire mesh handles heat and rough surfaces that would cut or melt a synthetic sling, which matters in foundry, forging, and scrap handling work.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Before putting any lifting equipment into service, verify it matches your hoist or crane setup and confirm the rated capacity covers your heaviest expected load with margin to spare. Routine inspection of welds, pins, and connection hardware helps catch wear before it becomes a safety issue. Keep a simple inspection log if your facility does not already have one, since tracking wear over time makes it easier to plan replacement before a part actually fails in use.

Equipment that sees daily use benefits from a quick visual check every time it comes out of storage, not just during scheduled inspections. Catching a small issue, like surface corrosion or a bent component, before it becomes a larger problem keeps rigging hardware safe and in service longer.

The specifications below cover everything you need to check compatibility with your equipment.

Order the Machining & Welding Tri-Tri Wire Mesh Sling 6X8 FT for a 7,200 pound capacity mesh sling sized 6 by 8 feet.

Product Info:
•  Working Load Limit: 7,200 lbs
•  Configuration: Triangle to Triangle
•  Width: 6 ft
•  Length: 8 ft
•  Shipping Weight: 35.5 lbs