The Machining & Welding Tri-Tri Wire Mesh Sling 4X8 FT gives you a ready-to-rig wire mesh sling, 4 feet by 8 feet, rated to 4,800 pounds.

This sling can be rigged as a straight vertical lift or as a choker hitch, giving you two ways to secure a load with the same piece of equipment.

End fittings are rated to match the mesh body, so the complete assembly carries a consistent working load limit from end to end.

Having both vertical and choker capability in one sling reduces the number of slings you need to stock for varied lifts.

From production floors to rail yards to municipal utility crews, this style of equipment gets used wherever a load needs to move safely between two points. Standardizing on purpose-built lifting equipment also makes training new operators easier, since the rigging setup stays consistent from lift to lift instead of changing based on whatever hardware happens to be nearby.

Good lifting practice starts before the load ever leaves the ground: confirm the working load limit fits the job, check that all hardware is in good condition, and keep the load centered to avoid uneven strain on the rigging. These habits matter as much as the equipment itself, and they cost nothing beyond a few extra minutes of attention before each pick, which is a fair trade for a safer shop floor.

Properly rated hardware, stored and maintained correctly, tends to outlast the equipment it gets paired with. Building a simple habit of checking condition before each use costs very little time and pays off in fewer surprises when a piece of rigging hardware is actually under load.

The specifications below cover everything you need to check compatibility with your equipment.

Order the Machining & Welding Tri-Tri Wire Mesh Sling 4X8 FT for a 4,800 pound capacity mesh sling sized 4 by 8 feet.

Product Info:
•  Working Load Limit: 4,800 lbs
•  Configuration: Triangle to Triangle
•  Width: 4 ft
•  Length: 8 ft
•  Shipping Weight: 22.5 lbs