The Machining & Welding Tri-Cho Wire Mesh Sling 6X10 FT gives you a ready-to-rig wire mesh sling, 6 feet by 10 feet, rated to 7,200 pounds.

Wire mesh construction wraps and supports irregular or delicate loads, like coils, castings, or rough stock, better than a flat strap or single-point hook.

End fittings are rated to match the mesh body, so the complete assembly carries a consistent working load limit from end to end.

Having both vertical and choker capability in one sling reduces the number of slings you need to stock for varied lifts.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Good lifting practice starts before the load ever leaves the ground: confirm the working load limit fits the job, check that all hardware is in good condition, and keep the load centered to avoid uneven strain on the rigging. These habits matter as much as the equipment itself, and they cost nothing beyond a few extra minutes of attention before each pick, which is a fair trade for a safer shop floor.

Rigging hardware like this sees repeated use, so look for equipment that is properly rated, clearly marked, and traceable to a manufacturer that stands behind its specifications. Keeping documentation on hand for each piece of equipment also makes routine inspections and any future certification requirements easier to manage.

Details on capacity, dimensions, and hardware are listed below for a quick comparison against your requirements.

Order the Machining & Welding Tri-Cho Wire Mesh Sling 6X10 FT for a 7,200 pound capacity mesh sling sized 6 by 10 feet.

Product Info:
•  Working Load Limit: 7,200 lbs
•  Configuration: Triangle to Choker
•  Width: 6 ft
•  Length: 10 ft
•  Shipping Weight: 43.3 lbs