The Machining & Welding 8 Ton 22 FT Modular Spreader gives you 8 ton of capacity in a 22 foot section that combines with other modular sections to match your load.

This section is built to connect with other modular spreader sections, so you can build a custom length on the fly for oversized or irregular loads.

The section is fabricated from structural steel with a bolted end connection, rated to hold the full working load limit when joined to compatible sections.

This approach is common in facilities that need to rig long or oversized loads only occasionally, since it avoids buying a dedicated long beam that sits unused most of the time.

From production floors to rail yards to municipal utility crews, this style of equipment gets used wherever a load needs to move safely between two points. Standardizing on purpose-built lifting equipment also makes training new operators easier, since the rigging setup stays consistent from lift to lift instead of changing based on whatever hardware happens to be nearby.

Good lifting practice starts before the load ever leaves the ground: confirm the working load limit fits the job, check that all hardware is in good condition, and keep the load centered to avoid uneven strain on the rigging. These habits matter as much as the equipment itself, and they cost nothing beyond a few extra minutes of attention before each pick, which is a fair trade for a safer shop floor.

Rigging hardware like this sees repeated use, so look for equipment that is properly rated, clearly marked, and traceable to a manufacturer that stands behind its specifications. Keeping documentation on hand for each piece of equipment also makes routine inspections and any future certification requirements easier to manage.

Full specifications are listed below so you can confirm fit against your current rigging before it ships.

Add the Machining & Welding 8 Ton 22 FT Modular Spreader to build out the exact spread length your next job calls for.

Product Info:
•  Capacity: 8 ton
•  Beam Length: 22 ft
•  Minimum Top Rigging Angle: 45 degrees
•  Style: Modular, bolt-together sections
•  Shipping Weight: 375 lbs