The Machining & Welding 7/8 IN Wire Rope Thr Stud is a threaded terminal fitting sized for 7/8 inch wire rope, built from carbon steel.

Wire rope assemblies use threaded studs at one or both ends when the application calls for a bolted or threaded connection rather than a hook or loop.

Manufactured to consistent tolerances, the fitting swages onto the wire rope with a rated holding strength that matches the rope it is paired with.

Matching carbon or stainless construction to your wire rope and its environment helps the fitting hold up as long as the rope itself.

Maintenance departments, fabrication shops, warehouses, and construction crews all rely on equipment in this category to handle lifts that come up again and again. Having the right beam or crane on hand means operators are not left rigging a load with mismatched slings or borrowed hardware, which keeps every lift consistent regardless of who is running it that day.

Good lifting practice starts before the load ever leaves the ground: confirm the working load limit fits the job, check that all hardware is in good condition, and keep the load centered to avoid uneven strain on the rigging. These habits matter as much as the equipment itself, and they cost nothing beyond a few extra minutes of attention before each pick, which is a fair trade for a safer shop floor.

Equipment that sees daily use benefits from a quick visual check every time it comes out of storage, not just during scheduled inspections. Catching a small issue, like surface corrosion or a bent component, before it becomes a larger problem keeps rigging hardware safe and in service longer.

The full spec sheet is below, covering capacity, dimensions, and construction details at a glance.

Order the Machining & Welding 7/8 IN Wire Rope Thr Stud sized to match your wire rope and mating hardware.

Product Info:
•  Wire Rope Diameter: 7/8 in
•  Material: Carbon steel
•  Shipping Weight: 8.58 lbs