The Machining & Welding 7/8 IN Wire Rope Ferrule is sized to match 7/8 inch wire rope, giving you a carbon steel sleeve for a compression swage termination.

This sleeve is swaged with a hydraulic press to permanently secure a wire rope loop, eliminating the need for clips or knots at the termination point.

Material choice between carbon and stainless steel lets you match the ferrule to the wire rope's own material and the assembly's environment.

Matching ferrule material to wire rope material avoids galvanic corrosion between dissimilar metals in outdoor or wet environments.

This type of lifting equipment is common in facilities that move machinery, structural steel, crates, or bulky components as part of daily operations. Rather than treating each lift as a one-off problem, a dedicated piece of equipment turns it into a routine, repeatable task that any trained operator can complete quickly and safely.

Rated capacity should always be treated as a hard limit, not a target, and a quick visual inspection before each lift is one of the simplest ways to keep a lifting operation safe. Make sure your operators are trained on the specific rigging setup this equipment requires, and confirm that anyone signing off on a lift understands how to read the working load limit and match it against the actual load being moved.

Equipment that sees daily use benefits from a quick visual check every time it comes out of storage, not just during scheduled inspections. Catching a small issue, like surface corrosion or a bent component, before it becomes a larger problem keeps rigging hardware safe and in service longer.

See the specifications below for the exact numbers you will want to check before ordering.

Order the Machining & Welding 7/8 IN Wire Rope Ferrule sized to match your wire rope diameter and material.

Product Info:
•  Wire Rope Diameter: 7/8 in
•  Ferrule Outer Diameter: 1.75 in
•  Ferrule Length: 3.875 in
•  Material: Carbon steel
•  Shipping Weight: 2.18 lbs